Worker pools

This article explains how you can set up and use on-premise private worker pools.

By default, Spacelift uses a managed worker pool hosted and operated by us. This is very convenient, but often you may have special requirements regarding infrastructure, security or compliance, which aren't served by the public worker pool. This is why Spacelift also supports private worker pools, which you can use to host the workers which execute Spacelift workflows on your end.

In order to enjoy the maximum level of flexibility and security with a private worker pool, temporary run state is encrypted end-to-end, so only the workers in your worker pool can look inside it. We use asymmetric encryption to achieve this and only you ever have access to the private key.

Setting up

Generate Worker Private Key

To make sure that we have no access to your private key, you will need to generate it on your end, and use it to create a certificate signing request to give to Spacelift. We'll generate a certificate for you, so that workers can use it to authenticate with the Spacelift backend. The following command will generate the key and CSR:

openssl req -new -newkey rsa:4096 -nodes -keyout spacelift.key -out spacelift.csr

Don't forget to store the spacelift.key file (private key) in a secure location. You’ll need it later, when launching workers in your worker pool.

You can set up your worker pool from the Spacelift UI by navigating to Worker Pools section of your account, or you can also create it programmatically using the spacelift_worker_pool resource type within the Spacelift Terraform provider.

Navigate to Worker Pools

Add Worker Pool Entity

Give your worker pool a name, and submit the spacelift.csr file in the worker pool creation form. After creation of the worker pool, you’ll receive a Spacelift token. This token contains configuration for your worker pool launchers, as well as the certificate we generated for you based on the certificate signing request.

After clicking create, you will receive a token for the worker pool. Don't forget to save your Spacelift token in a secure location as you'll need this later when launching the worker pool.

Upload the certificate you generated previously and create a worker pool.

Launch Private Worker Pool

The launcher binary is available here. In order to work, it expects to be able to write to the local Docker socket. Unless you're using a Docker-based container scheduler like Kubernetes or ECS, please make sure that Docker is installed.

Finally, you can run the launcher binary by setting two environment variables:

• SPACELIFT_TOKEN - the token you’ve received from Spacelift during worker pool creation

• SPACELIFT_POOL_PRIVATE_KEY - the contents of the private key file you generated, in base64.

You need to encode the entire private key using base-64, making it a single line of text. The simplest approach is to just run something like cat spacelift.key | base64 -w 0in your command line. For Mac users, the command will be something like cat spacelift.key | base64 -b 0

Congrats! Your launcher should now connect to the Spacelift backend and start handling runs.

Terraform Modules and Helm Chart

For AWS, Azure and GCP users we've prepared an easy way to run Spacelift worker pools. This repository contains the code for Spacelift's base images, and the following repositories contain Terraform modules to customize and deploy worker pools to AWS, Azure or GCP:

• AWS: terraform-aws-spacelift-workerpool-on-ec2.
• Azure: terraform-azure-spacelift-workerpool.
• GCP: terraform-google-spacelift-workerpool.

In addition, the spacelift-workerpool-k8s repository contains a Helm chart for deploying workers to Kubernetes.

AWS ECS is supported when using the EC2 launch type but Spacelift does not currently provide a Terraform module for this setup.

Configuration options

A number of configuration variables is available to customize how your launcher behaves:

• SPACELIFT_DOCKER_CONFIG_DIR - if set, the value of this variable will point to the directory containing Docker configuration, which includes credentials for private Docker registries. Private workers can populate this directory for example by executing docker login before the launcher process is started;

• SPACELIFT_MASK_ENVS- comma-delimited list of whitelisted environment variables that are passed to the workers but should never appear in the logs;

• SPACELIFT_WORKER_NETWORK - network ID/name to connect the launched worker containers, defaults to bridge;

• SPACELIFT_WORKER_EXTRA_MOUNTS - additional files or directories to be mounted to the launched worker docker containers, as a comma-separated list of mounts in the form of /host/path:/container/path;

• SPACELIFT_WORKER_RUNTIME - runtime to use for worker container;

• SPACELIFT_WHITELIST_ENVS - comma-delimited list of environment variables to pass from the launcher's own environment to the workers' environment;

• SPACELIFT_LAUNCHER_LOGS_TIMEOUT - custom timeout (the default is 7 minutes) for killing jobs not producing any logs. This is a duration flag, expecting a duration-formatted value, eg 1000s ;

• SPACELIFT_LAUNCHER_RUN_INITIALIZATION_POLICY - file that contains the run initialization policy that will be parsed/used; If the run initialized policy can not be validated at the startup the worker pool will exit with an appropriate error;

• SPACELIFT_LAUNCHER_RUN_TIMEOUT - custom maximum run time - the default is 70 minutes. This is a duration flag, expecting a duration-formatted value, eg. 120m ;

Passing metadata tags

When the launcher from a private worker pool is registering with the mothership, you can send along some tags that will allow you to uniquely identify the process/machine for the purpose of draining or debugging. Any environment variables using SPACELIFT_METADATA_ prefix will be passed on. As an example, if you're running Spacelift workers in EC2, you can do the following just before you execute the launcher binary:

export SPACELIFT_METADATA_instance_id=$(ec2-metadata --instance-id | cut -d ' ' -f2)

Doing so will set your EC2 instance ID as instance_id tag in your worker.

VCS Agents

VCS Agents are intended for users who have privately accessible version control systems (VCS), if your VCS is not private, then you do not need to use a VCS Agent.

When using private workers with a privately accessible version control system, you will need to ensure that your private workers have direct network access to your Version Control System. Additionally, you will need to inform the private workers of the target network address for each of your VCS Agent Pools. To do this, setup a variable mapping similar to the following example below, for each private VCS you are seeking to integrate.

export SPACELIFT_PRIVATEVCS_MAPPING_NAME_0=bitbucket_pool
export SPACELIFT_PRIVATEVCS_MAPPING_BASE_ENDPOINT_0=http://192.168.2.2
export SPACELIFT_PRIVATEVCS_MAPPING_NAME_1=github_pool
export SPACELIFT_PRIVATEVCS_MAPPING_BASE_ENDPOINT_1=https://internal-github.net
// ...

Network Security

Private workers need to be able to make outbound connections in order to communicate with Spacelift, as well as to access any resources required by your runs. If you have policies in place that require you to limit the outbound traffic allowed from your workers, you can use the following lists as a guide.

AWS Services

Your worker needs access to the following AWS services in order to function correctly. You can refer to the AWS documentation for their IP address ranges.

• Access to the public Elastic Container Registry if using our default runner image.

• Access to app.spacelift.io, and <your account name>.app.spacelift.io, which point at CloudFront.

• Access to the AWS IoT Core endpoints in eu-west-1 for worker communication via MQTT.

• Access to S3 in eu-west-1 for uploading run logs.

Other

In addition, you will also need to allow access to the following:

• Your VCS provider.

• Access to any custom container registries you use if using custom runner images.

• Access to any other infrastructure required as part of your runs.

Using worker pools

Worker pools must be explicitly attached to stacks and/or modules in order to start processing their workloads. This can be done in the Behavior section of stack and module settings:

Example when editing an existing stack.

Example when creating a new module.